32 Cavity Preform Mould

Mold Features

Valve gate
pin-valve gate ,pneumatic drive the nozzle pin simultaneous high speed open and close action, which can effectively control the injection hole open and close actions on each cavity. Reliable seal function, smooth moving, low thermal expansion rate, long using life and also saves electric energy
Hot runner
hot runner system is designed and made by ourselves, it can achieve ideal and prompt heating effect for preform production, cavity with lower injection pressure to reduce wear and tear of mould parts
heat system
with double heating system, it has separate temperature control mode ,the heat bar are used to heat hot-runner mainfold , small heaters supply the heating temperature for cavity nozzle continuously.
cooling system
each parts including core ,cavity and valve gate has independently cooling system.
heat treatment
mechanical treatment cavity and core to prolong service life ,nitrogen treatment with neck screw. with fitly operation ,guarantee Long using life over 2.0 million times of injection cycle.

32cavity Hot Runner System PET Preform Mold (No need cutting tail)

Main Data

Preform weight	10gr-50gr
Neck size	28-38mm
Mould cavity	32
Mould base material	P20 steel
Core/cavity material	Germany 2316 steel or Sweden S136
Screw neck material	Germany 2316 steel or Sweden S136
Mould size	Based on preform sample
Mould weight	About 2000kg
Heating plate	P20 steel
Pre-form type	Without injection tail, no need cutting
Mould structure	Automatic knockout, self-lock
Hot runner	Germany HOTSET
Heat insulation cap	USA DUPONT
Mould life time	2000000 shot times
Mould warranty	1years
Lead time	60days
Packing terms	Standard export wooden box

PET Preform Mould Specification
Product Name	PET preform mould
Core &Cavity Steel	steel2316, S136 stainless steel or customize
Mould base & Standard Component	DME,HASCO,LKM, P20, 3CR13, 4CR13 material etc.
Steel hardness:	HRC30-35 for base material.
	HRC45-48 for core and cavity material.
	HRC60-62 for special parts material
Neck diameter	20~38mm
Preform weight	Customize
Heating Coil	Rotfil from Italy or Hotsel from Germany
Cavity Number	2cavities,4cavities,6cavities,8cavities,16cavities,24/32/48/96cavities
Injection System	Pin- Valve gate with shut off & self-lock free-cut or short tail or long tail etc
Ejector System	Mould slider , Stripper plate ejection
Cycle Time	Based on PET preform thickness
Minimum order quantity	1 set
Delivery time	45-60 Days
Mould life	More than 2.0million Shots
Quality assurance	Two years warranty

Leave Us A Message

What Are You Looking For?